Manufacture of 20 Ft Tank Containers IMO I, IMO II, IMO V type and not dangerous, made out of stainless steel ASTM A-240, 316L type. Manufactured under ISO, TIR, UIC, AAR, ADR/RID, RTMDF/IMDG/ US.D.O.T/ CTC standards and ASME stamp.
STANDARD SPECIFICATIONS FOR 20fT TANK CONTAINERS: |
GENERAL |
IMO I |
IMO II |
Non Haz |
Maximun Gross Weight ( test ) |
Up to 34000 Kg/ 74800 lb. |
Frame Material |
High tensile steel suitable for sub zero temperatures |
Tank Material |
Depending on thicknessr: AISI 316 Ti, 316 L, 304 L |
Staking |
86,400 Kg/190,477LB Per Poste |
Capacities |
de 14.300 litre / 3.778 US Gal to 24.000 litre / 6.340 US Gal |
Working Pressure |
4 bar / 58 psig |
1.74 bar / 25.3 psig |
up to 2 bar / 29 psig |
Test Pressure |
6 bar / 87 psig |
2.61 bar / 37.8 psig |
up to 3 bar / 43.5 psig |
Tare Weight ( With insulation and heating) |
from 3400 Kg/ 7480 Lb up to 4190 Kg/ 9218 Lb |
from 2930 kg / 6446 Lb up to 3320 kg / 7304 Lb |
from 2850 kg / 6279 Lb up to 3220 Kg / 7084 Lb |
FITTINGS |
Manhole |
500 mm (20") with 6 or 8 swingbolts, Gasket in PTFE / braided fibre or sweet white rubber |
Venting |
1 or 2 relief valves, depending on capacity with or whitout bursting disc, depending on product carried. |
Air Line |
25 mm (1'') or 40 mm ( 1 1/2'') Valve |
Bottom discharge (80mm/3'') |
Internal footvalve with remote contol, Butterfly or ball valve, Blind flange or blank cap. |
Butterfly or ball valve, Blind flange or blank cap. |
Top discharge ( 80mm / 3") |
Provision only, or syphon tube, butterfly valve and blind flange |
Not applicable |
Spill trays |
With overflow pipes; with or without lids |
Calibration |
Top 30% with dipstick and calibration chart |
Steam Heating |
Heating areas from 2m2 (21,2Ft2) to 10 m2 (107.6 Ft2) |
Insulation |
50 mm (2'') combination of rockwool and polyurethane, aluminium or GRP cladding |
Top Acces |
Ladder at rear end, aluminium walkway to top accessories |
Options |
Various options on request |
Approvals |
CSC, RID/ADR/RTMDR-F,UIC,TIR,DOT(USA),DOT(UK),MMF,TC,AAR,FRA |
|
